current location：Home > Product > Alloy Sputtering Targets > Nickel base

Nickel base

Product name：NiV Target

NiV Target, Purity 99.9%-99.95%

Composition: NiV7wt% or to be customized
　 Specification:Round or Rectangular target or To customer’s specification

　　Typical Properties
　　Surface Finish               <= 0.8um
　　Surface Flatness              <=0.1mm
　　Tolerance                    ±0.20mm

　　Manufacturing Process
　　●Processed by vacuum induction melting, rolling and machining. Clean with ultrasonic cleaning equipment and vacuum sealed.

   Storage & Handling
　　●Should be stored in dry environment, in its original vacuum packaging, at room    temperature.

   Note: 1. Metallic elements were analyzed using GDMS
　　2. Gas elements were analyzed using LECO
　　3. Major elements were analyzed using ICP

Typical Element Analysis

Elements

Max ppm,wt

Elements

Max ppm,wt

Elements

Max ppm ,wt

Ni

Matrix

Cr

9.9

Cu

12

V

7.1 wt%

Ti

1.6

Si

55

Fe

60

Co

7

Al

19

Mg

0.14

Mn

7.4

Mo

2.2

C

<10

N

<10

O

84

S

1.6

H

<3

The last one：NiFe Target

Next：NiW or NiWX Tar...

Relevant recommendations

Elements	Max ppm,wt	Elements	Max ppm,wt	Elements	Max ppm ,wt
Ni	Matrix	Cr	9.9	Cu	12
V	7.1 wt%	Ti	1.6	Si	55
Fe	60	Co	7	Al	19
Mg	0.14	Mn	7.4	Mo	2.2
C	<10	N	<10	O	84
S	1.6	H	<3

Product

Contact us

Nickel base

Product name：NiV Target

NiV Target, Purity 99.9%-99.95%

Composition: NiV7wt% or to be customized Specification:Round or Rectangular target or To customer’s specification

Typical Properties Surface Finish <= 0.8um Surface Flatness <=0.1mm Tolerance ±0.20mm Manufacturing Process ●Processed by vacuum induction melting, rolling and machining. Clean with ultrasonic cleaning equipment and vacuum sealed.

Storage & Handling ●Should be stored in dry environment, in its original vacuum packaging, at room temperature.

Note: 1. Metallic elements were analyzed using GDMS 2. Gas elements were analyzed using LECO 3. Major elements were analyzed using ICP

Composition: NiV7wt% or to be customized
　 Specification:Round or Rectangular target or To customer’s specification

　　Typical Properties
　　Surface Finish <= 0.8um
　　Surface Flatness <=0.1mm
　　Tolerance ±0.20mm

　　Manufacturing Process
　　●Processed by vacuum induction melting, rolling and machining. Clean with ultrasonic cleaning equipment and vacuum sealed.

Storage & Handling
　　●Should be stored in dry environment, in its original vacuum packaging, at room temperature.

Note: 1. Metallic elements were analyzed using GDMS
　　2. Gas elements were analyzed using LECO
　　3. Major elements were analyzed using ICP